Simpson 13SIE-170 Pressure Washer Manual

The Simpson 13SIE-170 is a powerful pressure washer designed for residential and light commercial use. It features a 1700 PSI engine, a 1.2 GPM water flow rate, and comes equipped with various nozzles for different cleaning tasks. This manual provides essential information regarding safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting 10. Safety Information

Features at a Glance

Key components: 1700 PSI engine, adjustable spray nozzle, detergent tank, and ergonomic handle.

Feature	Description
1700 PSI Engine	Provides powerful cleaning performance
Adjustable Spray Nozzle	Allows for different spray patterns
Detergent Tank	Holds cleaning solution for enhanced cleaning
Ergonomic Handle	Designed for comfort during use
Wheels	For easy mobility

Installation

Unpack the pressure washer and inspect all components. Place on a stable surface.

Connect the water supply: Attach the garden hose to the water inlet.
Connect the spray wand: Ensure it is securely attached to the pressure washer.
Fill the detergent tank: Use a compatible cleaning solution.
Plug into a power source: Ensure the outlet is suitable for the pressure washer.

WARNING! Ensure all connections are secure before use.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Check water supply: Ensure there is adequate water flow.
Adjust spray nozzle: Set to the desired spray pattern.
Test the pressure: Start the machine and check for proper operation.

CAUTION! Always wear protective gear during operation.

Specifications

Model: Simpson 13SIE-170
Pressure: 1700 PSI
Flow Rate: 1.2 GPM
Engine Type: Electric
Weight: 30 lbs
Dimensions: 24 x 18 x 36 inches
Power Source: 120V AC

Controls and Settings

Access controls on the pressure washer for adjusting pressure and spray settings. The main controls include the power switch, spray nozzle adjustment, and detergent control.

Connecting Accessories

Ensure the pressure washer is off before connecting any accessories.

Attach the spray wand securely.
Connect any additional hoses or nozzles as needed.
Check for leaks before starting the machine.

Tip: Always refer to the accessory manual for specific instructions.

Operating the Pressure Washer

Follow these steps to operate the pressure washer safely and effectively.

Turn on the water supply.
Power on the pressure washer.
Select the appropriate spray pattern.
Begin cleaning by pulling the trigger on the spray wand.

WARNING! Do not point the spray wand at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the spray nozzle after each use.
Check hoses for wear and tear.
Store in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No pressure	Water supply issue	Check water supply and connections.
Leaks	Worn seals	Inspect and replace seals as needed.
Motor won't start	Power supply issue	Check power cord and outlet.
Inconsistent spray	Clogged nozzle	Clean or replace the spray nozzle.

Reset: Follow the reset procedure in the manual if available.

Safety Information

Read all safety instructions before operating the pressure washer. Always wear protective gear and ensure the area is clear of obstacles.