Simpson 60805 Pressure Washer Manual

The Simpson 60805 Pressure Washer is a powerful cleaning tool designed for residential and commercial use. It features a 208cc engine, delivering up to 3200 PSI and 2.5 GPM, making it ideal for tackling tough cleaning tasks such as driveways, decks, and vehicles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 208cc engine, 3200 PSI, 2.5 GPM, 25-foot high-pressure hose, adjustable spray nozzle, and detergent tank.

Feature	Description
Powerful Engine	208cc engine for high performance
High Pressure	Up to 3200 PSI for tough cleaning
Flow Rate	2.5 GPM for efficient cleaning
Adjustable Nozzle	Change spray pattern for different tasks
Detergent Tank	Built-in tank for easy soap application
Wheels	Large wheels for easy maneuverability
Hose Length	25-foot high-pressure hose for extended reach
Safety Features	Automatic shut-off and thermal relief

Installation

Unpack and inspect contents. Place the pressure washer on a stable surface.

Attach the handle: Use the provided screws to secure the handle to the main unit.
Connect the hose: Attach the high-pressure hose to the spray gun and the pressure washer.
Fill the detergent tank: Use the recommended detergent for optimal results.
Connect to water supply: Ensure the water source is turned on before starting.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Before operating the pressure washer, ensure all components are properly installed.

Check oil level: Ensure the engine oil is filled to the recommended level.
Prime the pump: Follow the instructions to prime the pump before starting.
Test the spray: Adjust the nozzle and test the spray pattern on a non-sensitive surface.

CAUTION! Always wear protective gear when operating the pressure washer.

Specifications

Engine: 208cc OHV engine.
Pressure: Up to 3200 PSI.
Flow Rate: 2.5 GPM.
Hose Length: 25 feet high-pressure hose.
Weight: Approximately 65 lbs.
Dimensions: 24 x 20 x 36 inches.
Fuel Type: Unleaded gasoline.
Oil Type: SAE 30 or 10W-30.

Controls and Settings

Access controls on the pressure washer for starting, stopping, and adjusting pressure settings.

Control Panel: Start/Stop switch, pressure adjustment knob, and detergent control.

Ensure to follow the user manual for detailed instructions on each control.

Connecting Accessories

Connect various accessories such as surface cleaners and extension wands for enhanced cleaning.

Turn off the pressure washer before connecting accessories.
Match the accessory to the spray gun connection.
Test the connection before starting the pressure washer.

Tip: Use compatible accessories for optimal performance.

Operating the Pressure Washer

Follow these steps to operate the pressure washer safely and effectively.

Start the engine: Follow the starting procedure outlined in the manual.
Adjust the pressure: Set the desired pressure for the cleaning task.
Begin cleaning: Use the spray gun to clean the surface, moving in a steady motion.
Shut down: Turn off the engine and disconnect the water supply after use.

WARNING! Never point the spray gun at yourself or others.

Maintenance

Regular maintenance is essential for optimal performance and longevity of the pressure washer.

Check oil level regularly and change as needed.
Clean the air filter and replace if necessary.
Inspect hoses and connections for wear and tear.
Store in a dry place when not in use.

Safety Information

Always follow safety guidelines to prevent accidents and injuries.

Wear protective eyewear and gloves.
Do not operate in wet conditions.
Keep children and pets away from the work area.
Read the manual thoroughly before use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality.
No pressure	Clogged nozzle	Clean or replace the nozzle.
Hose leaks	Damaged hose	Inspect and replace if necessary.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Detergent not dispensing	Clogged filter	Clean the detergent filter.

Reset: Follow the reset procedure in the manual if available.

Service: Contact customer support for further assistance.