Simpson KB65133 Pressure Washer Manual

The Simpson KB65133 is a powerful pressure washer designed for residential and commercial cleaning tasks. It features a reliable engine, high-pressure output, and a variety of nozzles for different cleaning applications. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.5 HP engine, 3000 PSI output, adjustable spray nozzle, 25-foot high-pressure hose, and detergent tank.

Installation

Unpack and inspect contents. Place the pressure washer on a stable surface.

1. Attach the hose: Connect the high-pressure hose to the pressure washer and the spray gun.
2. Connect water supply: Attach the garden hose to the water inlet.
3. Check for leaks: Turn on the water supply and check for any leaks.
4. Plug in the unit: Connect to a power source if applicable.

WARNING! Ensure all connections are secure before starting the unit.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

1. Set up the water supply: Ensure the water source is connected and turned on.
2. Check oil levels: Ensure the engine oil is at the correct level.
3. Adjust nozzle: Set the nozzle to the desired spray pattern.
4. Start the engine: Follow the starting procedure outlined in the manual.

CAUTION! Always wear safety gear when operating the pressure washer.

Specifications

• Engine: 6.5 HP gas engine.
• Pressure Output: 3000 PSI.
• Flow Rate: 2.5 GPM.
• Hose Length: 25 feet high-pressure hose.
• Weight: 65 lbs.
• Dimensions: 24 x 18 x 36 inches.
• Fuel Type: Unleaded gasoline.
• Oil Type: SAE 30 engine oil.

Controls and Settings

Access controls on the pressure washer for adjusting pressure and spray settings. Key controls include the throttle, choke, and on/off switch.

Safety Features: Automatic shut-off and pressure relief valve to prevent accidents.

Connecting Accessories

Attach accessories such as different nozzles and brushes for various cleaning tasks.

1. Turn off the pressure washer before changing accessories.
2. Match the accessory to the correct port.
3. Securely attach the accessory before use.

Tip: Always refer to the manual for compatible accessories.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

1. Start the engine: Follow the starting procedure.
2. Adjust the nozzle: Set to the desired spray pattern.
3. Begin cleaning: Move the spray gun in a sweeping motion.
4. Turn off the unit: Follow the shutdown procedure after use.

WARNING! Do not point the spray gun at people or animals.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check oil levels regularly and change as needed.
2. Clean the air filter to ensure proper airflow.
3. Inspect hoses and connections for wear and tear.
4. Store the unit in a dry place when not in use.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the pressure washer.

• Wear appropriate safety gear including goggles and gloves.
• Do not operate in wet conditions.
• Keep children and pets away from the work area.
• Do not bypass safety features.

Troubleshooting

Service: For further assistance, contact customer support.