Simpson SuperPro Roll-Cage SW3625HADS 50-State Pressure Washer manual

The Simpson SuperPro Roll-Cage SW3625HADS is a powerful pressure washer designed for heavy-duty cleaning tasks. It features a durable roll-cage frame for protection and easy transport, a reliable Honda engine, and a high-performance pump that delivers up to 3600 PSI of cleaning power. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Setup and Assembly 4. Specifications 5. Operating Instructions 6. Maintenance 7. Troubleshooting 8. Warranty Information

Features at a Glance

Key features include: durable roll-cage frame, Honda engine, high-performance pump, adjustable pressure settings, and multiple nozzle options for various cleaning tasks.

Feature	Description
Roll-Cage Frame	Provides protection and easy transport
Honda Engine	Reliable and powerful engine for consistent performance
High-Performance Pump	Delivers up to 3600 PSI for effective cleaning
Adjustable Pressure	Allows customization of pressure settings for different surfaces
Multiple Nozzles	Includes various nozzle options for versatile cleaning

Safety Information

Always wear appropriate safety gear, including goggles and gloves. Ensure the area is clear of bystanders before operating the pressure washer. Read all safety instructions in the manual before use.

Setup and Assembly

Unpack the pressure washer and ensure all parts are included. Follow the assembly instructions carefully to set up the unit for operation.

Attach the handle to the frame.
Connect the high-pressure hose to the pump.
Install the nozzle on the wand.
Fill the fuel tank with gasoline.
Check oil levels before starting.

WARNING! Ensure all connections are secure before starting the pressure washer.

Specifications

Model: SW3625HADS
Engine: Honda 389cc
Max Pressure: 3600 PSI
Flow Rate: 2.5 GPM
Weight: 120 lbs
Dimensions: 24 x 22 x 36 inches
Fuel Type: Unleaded gasoline
Warranty: 2 years limited warranty

Operating Instructions

To operate the pressure washer, follow these steps:

Start the engine by following the starting procedure outlined in the manual.
Select the appropriate nozzle for your cleaning task.
Adjust the pressure settings as needed.
Begin cleaning by pulling the trigger on the wand.

CAUTION! Do not point the nozzle at people or animals.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Check oil levels and change oil regularly.
Clean the air filter and replace if necessary.
Inspect hoses and connections for wear and tear.
Store the pressure washer in a dry place when not in use.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
No pressure	Clogged nozzle	Clean or replace the nozzle; check hose for kinks.
Excessive vibration	Loose parts	Tighten all screws and bolts; inspect for damage.
Oil leaks	Worn seals	Inspect seals and replace if necessary.

Reset: Refer to the manual for reset procedures if applicable.

Warranty Information

This pressure washer comes with a 2-year limited warranty. For warranty claims, please contact customer service or visit the manufacturer's website.